JoeDeclassified.com

In case anyone was wondering, yes the light piping in the Retaliation Zartan heads can come out easily



I held the head under a hairdryier for a minute or two then dug my fingernail into the back of the light piping and pushed toward the front of the head and up.

Interesting...do you have a planned use for it now?

I just needed to get the piping out to widen the eye holes (there was some excess plastic making them smaller than normal) I'm going to use this head to make a Renegades Zartan head. I'll have to see if the green piece will fit in the head since I like that one better.

But this could also make it easier to just add a small led into the head under the cowl and possibly turn Zartan's eyes into battery powered light up (Just have to find room for the battery )